Dostałem w w prezencie od kolegi wzmacniacz do WiFi 1W, po wlutowaniu filtrów przenosi 1296, ładnie trzyma 1W. Nie sprawdzałem jeszcze granic jego działania pod względem częstotliwości. W następnym poście wersja 4W - jest trochę inna w środku.
Wbudowane LNA 15 dBm
Zasilanie BIAS-T (w komplecie )
Hermetyczna obudowa - można zastosować bezpośrednio pod anteną
FRONT:
Filtry:
Płytka
Element którego przeznaczenia nie jestem pewien:
tył:
Dane od producenta
2.4GHZ Wi-Fi Outdoor Signal Booster, 802.11b/g, 100mw(1w)
PI Manufacturing's signal booster extenders are provided to transmit incoming signals from an antenna source to an output device, such as a radio. These extenders are used to connect over distances and through the walls to allow for the user to enjoy their experience the way that they prefer. the boxes are weather proof and very durable. The usual trade off for convenience is quality, however with the use of these signal booster extenders, having to make a choice of one over the other is no longer a concern.
Features
Features
Die Casting Aluminum for better heat exchanger
Lightning Protection
TX LED and Power LED
Stronger signal improves throughput for both of the access point and WLAN card.
General Specification
Operating Range: 2400 ~2500 GHz
Operation Mode: Bi-Directional, half duplex, TDD sense RF carrier from transmitter and automatically switches receive to transmit mode.
Connector: N-Type female, 50 ohms
Lightning Protection: Direct DC Ground & DC block on amplifier output
DC Surge Protection: at 5VDC input from transmission cable
Frequency Response: +/- 1dB over operating range
Output Power: see the package
Transmit Gain: Auto Gain Control (AGC)
Receive Gain: 15 dBm for 802.11b, 18d Bm for 802.11 g/b products
Receive Noise Figure: 3.5 dBm nominal
Weatherproof: 100%
Mechanical Specification
Operating Temperature: -20 to + 70 C
Operation Humidity: up to 100% relative humidity
Power Adapter: 2A / 6V DC, 100-240V AC Power Supply
Output Power Optional:
0.5W/1W/2W3W/4W each for 802.11b product
200mW/0.5W/1W each for 802.11 g/b product
Wbudowane LNA 15 dBm
Zasilanie BIAS-T (w komplecie )
Hermetyczna obudowa - można zastosować bezpośrednio pod anteną
FRONT:
Filtry:
Płytka
Element którego przeznaczenia nie jestem pewien:
tył:
Dane od producenta
2.4GHZ Wi-Fi Outdoor Signal Booster, 802.11b/g, 100mw(1w)
PI Manufacturing's signal booster extenders are provided to transmit incoming signals from an antenna source to an output device, such as a radio. These extenders are used to connect over distances and through the walls to allow for the user to enjoy their experience the way that they prefer. the boxes are weather proof and very durable. The usual trade off for convenience is quality, however with the use of these signal booster extenders, having to make a choice of one over the other is no longer a concern.
Features
Features
Die Casting Aluminum for better heat exchanger
Lightning Protection
TX LED and Power LED
Stronger signal improves throughput for both of the access point and WLAN card.
General Specification
Operating Range: 2400 ~2500 GHz
Operation Mode: Bi-Directional, half duplex, TDD sense RF carrier from transmitter and automatically switches receive to transmit mode.
Connector: N-Type female, 50 ohms
Lightning Protection: Direct DC Ground & DC block on amplifier output
DC Surge Protection: at 5VDC input from transmission cable
Frequency Response: +/- 1dB over operating range
Output Power: see the package
Transmit Gain: Auto Gain Control (AGC)
Receive Gain: 15 dBm for 802.11b, 18d Bm for 802.11 g/b products
Receive Noise Figure: 3.5 dBm nominal
Weatherproof: 100%
Mechanical Specification
Operating Temperature: -20 to + 70 C
Operation Humidity: up to 100% relative humidity
Power Adapter: 2A / 6V DC, 100-240V AC Power Supply
Output Power Optional:
0.5W/1W/2W3W/4W each for 802.11b product
200mW/0.5W/1W each for 802.11 g/b product