Hello All
Herewith my transverter with the XP module.
73 Hans
The RX was broken in the module, ordered a new one, this was working fine on RX
Herewith my transverter with the XP module.
73 Hans
(11-08-2021, 13:14)PE1CKK napisał(a): I have tested the received transverter. The transmitter is working fine both with 900 and 1800 MHz LO and 2346MHz IF. I have > 1.5W output. But I have trouble with the RX path. First tested with 1500MHz IF and 939.5MHz LO but not working. Changed to 1879MHz LO but also not working. After that I tried several LO-IF configurations but no show! Do you have any sugesstions? After my holliday I will test another one from a friend in my setup. I made a powersupply with sequencer to be sure the Negative voltage is first.
Many Regards, Hans Holsink pe1ckk
The RX was broken in the module, ordered a new one, this was working fine on RX